No Signals Posted October 4, 2010 Share Posted October 4, 2010 I dont have any pitch guides to hand, does anyone know what thread form the filler cap on a Lockheed master cylinder is? At a guess without my specs, it is inch and an eighth dia, but what thread? Pipe? Brass? BSF? BA? Trying to get an adapter knocked up so I can use a pressure bleed on it, hopefully, tomorrow. Thanks for any useful input. Quote Link to comment Share on other sites More sharing options...
Tony B Posted October 5, 2010 Share Posted October 5, 2010 I managed to knock up just what you require for my Dodge from bits obtained from the yery patient local Plumbase. Quote Link to comment Share on other sites More sharing options...
No Signals Posted October 5, 2010 Author Share Posted October 5, 2010 I managed to knock up just what you require for my Dodge from bits obtained from the yery patient local Plumbase. Yep, I know - it was me that suggested you used plumbing bits having devised that fix for mine! However the Lockheed unit is a very different size. Got it sorted though. Quote Link to comment Share on other sites More sharing options...
Tony B Posted October 5, 2010 Share Posted October 5, 2010 Then you have my humble thanks, and I'm sorry for not thanking you before!! :bow: Anyone with a lathe may be able to turn up the odd ones? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.