Jump to content

griff66

Members
  • Posts

    1,879
  • Joined

  • Last visited

Everything posted by griff66

  1. now if it was a petrol engine best thing u can do is take couple of spark plugs out heat em up quickly reinstall in engine and start up never fails!
  2. when i put in petrol car reg obviously say exempt when put in ferret reg says exempt till 2018 why not sure.
  3. think exemption also might be pre 1972 ferret only exempt till 2018
  4. my isuzu trooper 3.1 not exempt but the ferret is!
  5. griff66

    Slow running

    trouble is if u make access to site fee paying you constrict the knowledge base ,plus advertisers would be less willing to place adverts on the site.
  6. griff66

    Slow running

    and now all seems fine?:shocked:
  7. griff66

    Slow running

    now it seems fine very strange!
  8. griff66

    Slow running

    forum home page gone awol!!!
  9. griff66

    Slow running

    all seems good now:-D:-D
  10. griff66

    Slow running

    thought i was on dial-up internet at first!
  11. just play along with it if u have time tell him u are following his instructions whilst doing nowt may be browsing hmvf ! and make it your mission to wind up a indian chap!!:cool2:
  12. do the usual stuff are batts charged does fuel get to carb is there a spark etc
  13. have seen the sof stand at war and peace they sell some very odd stuff!!
  14. few reasons why nitrogen is preferred , its inert, and molecules are comparably large so leak rate is slower
  15. if same as b60 thermostat u looking at 60 odd quid for one
  16. very good ,if u search also for daimler ferret nice footage of one being offloaded from air transport
  17. u need a ferret they never go wrong!!!!:cool2:
  18. my mk1/2 ferret has a alternator fitted plus front hatch modified to accept night vision scope far as i know last base over haul done in 83, last regiment if served with life guards ,who took it out to the gulf for a while!
  19. similar i suppose to ferrets with alternators and some with generators mind u that would have been done i guess at base overhaul
  20. as long as u do not feel a drive shaft vibration all is fine a prop shaft as u know will be balanced on its own ,not as a entire drive shaft assembly.worth using new nuts on assembly i found a few loose on my ferret and that was down to the military! if u think on reassembly u have a problem u could use a dti and measure run out on shaft and try moving flange faces relative to each other (bit overkill though!) if wheel hubs not lined up use opportunity to align them.
  21. yep heard of that one why cant phone operators block the number?
  22. griff66

    gif gaf

    whole thread on site if u need to unlock phone well impressed so far!
×
×
  • Create New...