Meekumslr Posted May 17, 2020 Share Posted May 17, 2020 (edited) Chaps, long story short, I boiled and cooked my truck last weekend but no damage done. I’m now fitting a water temp gauge but need some spacers to go between the rear dash plate and dash cover plate. Im also after a couple of screw bolts (to keep it original). The spacers needed are 12mm in length, 11mm (not important) in diameter and the originals have a 5.5mm hole. X2 The screw bolts will need to be at least 15mm to cover the spacer and two 1mm thick panels. Ive looked online but I’m getting frustrated trying to get the right bits. Naturally, I will pay the going rate and postage just to get it sorted. Any help would be appreciated. Neil. Edited May 17, 2020 by Meekumslr Quote Link to comment Share on other sites More sharing options...
MatchFuzee Posted May 17, 2020 Share Posted May 17, 2020 Would a 2BA bolt (4.699mm dia) suitable? https://www.ba-bolts.co.uk/steelrnd.html Quote Link to comment Share on other sites More sharing options...
Zero-Five-Two Posted May 17, 2020 Share Posted May 17, 2020 Agree with Matchfuzee. Looks like 2BA or 3/16" BSF both are available on Ebay in various lengths Quote Link to comment Share on other sites More sharing options...
Meekumslr Posted May 17, 2020 Author Share Posted May 17, 2020 Thank you very much for your replies. just ordered 2 x 3/16 bsf 3/4” bolts and standoff collars (only just realised their name). much appreciated. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.