philb Posted January 14, 2009 Posted January 14, 2009 Do any of you learned folk know the correct length of the front brake hoses? I'm about to replace mine and I noticed the offside one had been rubbed by the tyre - only on full lock as far as I can tell. It's 490mm between the ends of the ferrules (easier than measuring the cone to cone length) and I can't work out whether to made the new one shorter, longer or the same length. The nearside one is 465mm between the ends of the ferrules. By the way, the existing hoses (and the only replacement types I've found - to SAE J 1402) are 27mm OD ( = don't like bending too tight) and have a specified minimum bend radius of 140mm. That just doesn't work out on the Matador. Any advice? Thanks, in anticipation, Phil Quote
wildside Posted July 18, 2009 Posted July 18, 2009 Hi there if you talk to these people they make new rubber brake pipes to pattern they may be able to help you....01280823117 ask for nikki Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.