434 coolant drainage

[Metroman]

I've seen the position of Mark's drain tap on his 432, but on the 434 its not their..

 

Any clues - DaveP :idea:

[sirhc]

What does it say in the manual?

[Metroman]

What does it say in the manual?

I have an operations manual, it doesn't go into enough detail..

[DaveP]

Should be the same as on the 432,looking in through the front hatch it is to the left of the bottom crank damper and connected to a hose which is directed to the front hull plug hole although this hose is quite often missing.

I,ve got some spare taps etc here if you are stuck:)

Did you get fixed up with the bits for your rear bench? and sort yor crane out

Dave P

[Metroman]

Should be the same as on the 432,looking in through the front hatch it is to the left of the bottom crank damper and connected to a hose which is directed to the front hull plug hole although this hose is quite often missing.

I,ve got some spare taps etc here if you are stuck:)

Did you get fixed up with the bits for your rear bench? and sort yor crane out

Dave P

..no sign of pipe or tap, I'll try & take some pics today.

 

See http://hmvf.co.uk/forumvb/showthread.php?t=9032&page=14 & page 15, still looking for some road wheels.

[Rob Reznik]

You should have stuck to Russian trucks :-D :pfrt:

[Metroman]

Thanks Dave, got the lead light in there found it covered in grease & oil. You can see it right at the bottom of pic.

 

[Metroman]

You should have stuck to Russian trucks :-D :pfrt:

Hi ya Rob

 

I think there all the same, they go sometimes & stop :-D. Did look at a Kraz 255 a couple of weeks ago, still looking.

 

Regards to the family :yay:

[DaveP]

Looks like a pack out job soon and a good service and spring clean,all that oil has come from somewhere.:nono:

Doesn,t look like its had a birthday for a while:sweat:

Dave P