MartinN Posted August 15 Share Posted August 15 I need to replace the exhaust on my lightweight. Struggling to see how the front section can be fitted. Do I have to take out the cross member to fit? Quote Link to comment Share on other sites More sharing options...
ruxy Posted August 15 Share Posted August 15 LWT does have a removable gearbox cross-member , however not the case with civvy & CL , if it's a standard 2.1/4 pet /diesel - you should have no problem. Quote Link to comment Share on other sites More sharing options...
MartinN Posted August 15 Author Share Posted August 15 So the cross member should be removed? Quote Link to comment Share on other sites More sharing options...
Richard Farrant Posted August 15 Share Posted August 15 12 minutes ago, MartinN said: So the cross member should be removed? Martin, don't forget that you will have to put a supporrt under the gearbox before you take the cross member out. Quote Link to comment Share on other sites More sharing options...
ruxy Posted August 15 Share Posted August 15 41 minutes ago, MartinN said: So the cross member should be removed? I never have , with a civvy you can't as it does not have one ! Quote Link to comment Share on other sites More sharing options...
10FM68 Posted August 15 Share Posted August 15 2 hours ago, MartinN said: So the cross member should be removed? You shouldn't need to. It should slip over the top of the gearbox cross member with a bit of wiggling fairly easily. This is a Series 3, but yours will be similar: Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.