mick gilby Posted November 1, 2022 Share Posted November 1, 2022 I recently read a post from a guy in Greece or somewhere else who had a triumph 3 HW oil pump in the post could he or another person possibly measure the brass oil pump body from center of 1/4" stud holes to the top of brass casting so i can rework the taller triumph one I have. Have been working on this 3 H for over a year now and this is holding me up a bit Quote Link to comment Share on other sites More sharing options...
guy66 Posted November 2, 2022 Share Posted November 2, 2022 Morgo makes a Oil pump for Triumph 3 Hw !https://www.morgo.co.uk/product/morgo-triumph-tiger-single-plunger-oil-pump/ But for the moment out of stock . Quote Link to comment Share on other sites More sharing options...
mick gilby Posted November 6, 2022 Author Share Posted November 6, 2022 Thanks for that I all ready knew about the Morgo pump ,I am just trying to use this alloy block triumph twin one as I have it. Just need the dimension from the center of the 1/4" mounting holes to the top of pump plus the total length of the 2 plungers would be helpful too. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.