mick gilby

Thanks for that I all ready knew about the Morgo pump ,I am just trying to use this alloy block triumph twin one as I have it. Just need the dimension from the center of the 1/4" mounting holes to the top of pump plus the total length of the 2 plungers would be helpful too.

I recently read a post from a guy in Greece or somewhere else who had a triumph 3 HW oil pump in the post could he or another person possibly measure the brass oil pump body from center of 1/4" stud holes to the top of brass casting so i can rework the taller triumph one I have. Have been working on this 3 H for over a year now and this is holding me up a bit

Hello, Can you help by measuring the overall height of the 3 HW oil pump plus the length of the 2 plungers. I am trying to re-build a 3hw engine and am lacking the correct oil pump ,so have a pre-unit one with an alloy body in good condition,but its too tall to operate properly, hence the request. The size from the machined face with the oil port holes to th top would be a great help.