Recently acquired propshaft, described by previous owner as off a 1940's jeep!!! Anybody recognise it, couldn't mic it as my tools are in work but approximate dimensions are Length 54",compressed 52", Diameter 2.25", Flange diameter 3.375", Bolt centres 2.625", leather gaiters each end covering splines which are slightly damaged but otherwise it is in good condition , only requiring a coat of paint.
Question
Degsy
Recently acquired propshaft, described by previous owner as off a 1940's jeep!!! Anybody recognise it, couldn't mic it as my tools are in work but approximate dimensions are Length 54",compressed 52", Diameter 2.25", Flange diameter 3.375", Bolt centres 2.625", leather gaiters each end covering splines which are slightly damaged but otherwise it is in good condition , only requiring a coat of paint.
Edited by Degsy
Link to comment
Share on other sites
7 answers to this question
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.