teletech Posted February 16, 2015 Share Posted February 16, 2015 Obviously SWB. Series 2 perhaps? I rescued it from scrap some years ago in case I bought a rover and wanted a knock-about top or a starting point for something custom but it's time to clean house. The back door is 35-5/8" wide, 44-1/4" tall if that helps. Quote Link to comment Share on other sites More sharing options...
Ivor Ramsden Posted February 16, 2015 Share Posted February 16, 2015 It's from a Series 2 or 3 88 inch wheelbase Land-Rover. The hardtops are the same for both. Quote Link to comment Share on other sites More sharing options...
ruxy Posted February 16, 2015 Share Posted February 16, 2015 (edited) There are differences , but change point not at S2A / S3 ISTR The rear panels with solid rivets , later S3 had pop-rivets , there were some difference on external roof reinforcement ribs. However IIRC only a early tin-top has the water gutter above the door / cat-flap , IIRC this change was within S2A period.. So - I would guestimate it is S2A. Edited February 16, 2015 by ruxy spelin Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.