Skull Crusher Posted January 15, 2015 Share Posted January 15, 2015 (edited) Hi All! Just got my KraZ 214b at home! I hope you enjoy the pics! Ah, it has the front bumper...it is on the back bed! Edited January 15, 2015 by Skull Crusher Quote Link to comment Share on other sites More sharing options...
fesm_ndt Posted January 16, 2015 Share Posted January 16, 2015 your one is bigger than my one Nice shed you have there Quote Link to comment Share on other sites More sharing options...
Starfire Posted January 16, 2015 Share Posted January 16, 2015 Very nice. Got any vids of it running? Cheers, Terry Quote Link to comment Share on other sites More sharing options...
Skull Crusher Posted January 16, 2015 Author Share Posted January 16, 2015 (edited) your one is bigger than my one Nice shed you have there Yep, the shed is nice...but is not mine...unfortunately.....:embarrassed:, belongs to the shop where I am doing the engine swap. it´s big but not that BIG...:laugh: Yours is a hell of a nice truck too! Edited January 16, 2015 by Skull Crusher Quote Link to comment Share on other sites More sharing options...
Skull Crusher Posted January 16, 2015 Author Share Posted January 16, 2015 (edited) Very nice. Got any vids of it running? Cheers, Terry It´s not running yet, the Yaz is shot to death...I am swapping in a Scania 112H 11L Turbo. Got some pics of the Yaz comming out. Also made the Scania run on the ground, out of the truck in order to check if all was fine before going in. Edited January 16, 2015 by Skull Crusher Quote Link to comment Share on other sites More sharing options...
paulob1 Posted January 17, 2015 Share Posted January 17, 2015 wonder how the original engine got shot...low on oil or just hard work... Quote Link to comment Share on other sites More sharing options...
N.O.S. Posted January 17, 2015 Share Posted January 17, 2015 Someone's been using steroidal wax on that GMC crane truck……... Quote Link to comment Share on other sites More sharing options...
Enigma Posted January 17, 2015 Share Posted January 17, 2015 Wearing a Motorhead shirt next to a big truck, good combination. Those kind of Russian trucks look impressive. Quote Link to comment Share on other sites More sharing options...
Skull Crusher Posted January 19, 2015 Author Share Posted January 19, 2015 wonder how the original engine got shot...low on oil or just hard work... Yep, me too! I got the truck like it is, so no clues about how the Yaz was used and abused...:blush: Inside the cabe, on the dash all data plates are in german, so I supposeit spent his life before coming to to Brazil in DDR. What do you all think about it? Does make any sense? All opinions are welcome! Quote Link to comment Share on other sites More sharing options...
Skull Crusher Posted January 19, 2015 Author Share Posted January 19, 2015 Someone's been using steroidal wax on that GMC crane truck……... The CCKW is the main hoist at the shop! Quote Link to comment Share on other sites More sharing options...
Skull Crusher Posted January 19, 2015 Author Share Posted January 19, 2015 Wearing a Motorhead shirt next to a big truck, good combination.Those kind of Russian trucks look impressive. Motörhead is the way to go when working on ex-URSS trucks! Quote Link to comment Share on other sites More sharing options...
Skull Crusher Posted January 19, 2015 Author Share Posted January 19, 2015 Today more work done: got all the stuff that is not to be used and was on the firewall (some reservoirs, brackets, electrical cables and connections); removed the old exaust system (will make it new anyway); removed the steering box (it is in the way of the Scania starter, must use other steering system); Well, that is all for today, more to come... Quote Link to comment Share on other sites More sharing options...
Skull Crusher Posted January 21, 2015 Author Share Posted January 21, 2015 Today the Scania engine went in, for fitment checks. It's a tight fit, but doable. Some fabrication required; Quote Link to comment Share on other sites More sharing options...
woodsmoke7 Posted February 25, 2015 Share Posted February 25, 2015 Hello, looking good. What are you going to replace the ram steering setup with? Im thinking about changing mine also. Quote Link to comment Share on other sites More sharing options...
iannima Posted March 1, 2015 Share Posted March 1, 2015 Inside the cabe, on the dash all data plates are in german, so I supposeit spent his life before coming to to Brazil in DDR. What do you all think about it? Does make any sense? All opinions are welcome! [ATTACH=CONFIG]100501[/ATTACH] For the little that it is worth, I can confirm that your truck is likely to have been in service in the NVA of the DDR. Because the fitting pictured above (presumably for a rifle) is typical DDR Quote Link to comment Share on other sites More sharing options...
woodsmoke7 Posted March 1, 2015 Share Posted March 1, 2015 For the little that it is worth, I can confirm that your truck is likely to have been in service in the NVA of the DDR. Because the fitting pictured above (presumably for a rifle) is typical DDR Yes they are, my 22 sits in mine nicely. Quote Link to comment Share on other sites More sharing options...
Skull Crusher Posted March 3, 2015 Author Share Posted March 3, 2015 Hello, looking good. What are you going to replace the ram steering setup with?Im thinking about changing mine also. Hi up there! I'm replacing mine with Valmet Orbitrol + steering ram. Just wonking on it right now. As soon as I have it working, I come to post some pics for you to check, may be it can be the solution to your truck too. Quote Link to comment Share on other sites More sharing options...
Skull Crusher Posted March 3, 2015 Author Share Posted March 3, 2015 For the little that it is worth, I can confirm that your truck is likely to have been in service in the NVA of the DDR. Because the fitting pictured above (presumably for a rifle) is typical DDR Thanks a lot for helping me out with that! I will try to dig a bit more into the NVA thing! Quote Link to comment Share on other sites More sharing options...
woodsmoke7 Posted March 5, 2015 Share Posted March 5, 2015 Hi up there! I'm replacing mine with Valmet Orbitrol + steering ram. Just wonking on it right now. As soon as I have it working, I come to post some pics for you to check, may be it can be the solution to your truck too. Hello,ok yes that would be useful! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.