I am in the process of changing the tyres :sweat:.They have grown on to the rims with a vengeance,had to cut the tyers of but managed to save the tube and gaiters . Some of the rim studs broke free from the weld and so needed re welding and the threads were very tight in the nuts , so i was going to run a tap and die over the threads does any one know what
thread they should be as will need to buy a tap and die:??? .
Question
gps
Hi all
I am in the process of changing the tyres :sweat:.They have grown on to the rims with a vengeance,had to cut the tyers of but managed to save the tube and gaiters . Some of the rim studs broke free from the weld and so needed re welding and the threads were very tight in the nuts , so i was going to run a tap and die over the threads does any one know what
thread they should be as will need to buy a tap and die:??? .
Link to comment
Share on other sites
1 answer to this question
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.