PDonovan Posted October 20, 2012 Share Posted October 20, 2012 " width="644" height="390">">Something went wrong... http://www.youtube.com/watch?v=vdjvudpFq94 :nut: Quote Link to comment Share on other sites More sharing options...
northrecce Posted October 20, 2012 Share Posted October 20, 2012 Y squadron doing there bit for the country :cool2:. And someone please take her out side and thrash her with a wet halibut . Scorpion tank :shocked: Quote Link to comment Share on other sites More sharing options...
antar Posted October 21, 2012 Share Posted October 21, 2012 Quite ammusing that at the end of the clip in the background they can be seen removing chip pans from the tracks. Quote Link to comment Share on other sites More sharing options...
AndyFowler Posted October 21, 2012 Share Posted October 21, 2012 They'll be doing this with the fire appliances instead of the chip pans soon ! :nut: Quote Link to comment Share on other sites More sharing options...
robin craig Posted October 21, 2012 Share Posted October 21, 2012 Well make a fantastic vignette for Beltring in many years to come when the owner of that then disposed of vehicle . . . R Quote Link to comment Share on other sites More sharing options...
timbo Posted October 22, 2012 Share Posted October 22, 2012 Also goes to show how ground pressure is on CVRT, should've used a Chally but then I guess would not make such good telly as one pass and they would all be flat!! Quote Link to comment Share on other sites More sharing options...
BRDM Driver Posted October 22, 2012 Share Posted October 22, 2012 Yes, it would have been more effective to yomp a load of para's over the pans instead! Quote Link to comment Share on other sites More sharing options...
northrecce Posted October 22, 2012 Share Posted October 22, 2012 Also goes to show how ground pressure is on CVRT, should've used a Chally but then I guess would not make such good telly as one pass and they would all be flat!! I was told its something around 4 pounds per square inch. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.