BRDM Driver Posted September 3, 2012 Share Posted September 3, 2012 My J60 starter is making a loud 'dringgg' noise on starting, like the starter pinion is catching the starter ring on the flywheel as it disengages. On lifting the deck and taking a peek inside, I found this weird tube fitted to the end of the starter shaft. It's free to rotate and slide up and down but doesn't come off the shaft. Does this look right??? Quote Link to comment Share on other sites More sharing options...
guykay Posted September 3, 2012 Share Posted September 3, 2012 Just had a look at the spare j60s in my garage. The spacer is plastic on mine & is retained by a thin nut on the end of the shaft. Looks like the nut has come off, probably lurking somewhere inaccessible in the depths of the engine compartment Quote Link to comment Share on other sites More sharing options...
timbo Posted September 3, 2012 Share Posted September 3, 2012 Hmmm doesnt look right to me - I have a spare starter in the garage will post a pic when i get home tonight... Cheers Timbo Quote Link to comment Share on other sites More sharing options...
Richard Farrant Posted September 3, 2012 Share Posted September 3, 2012 The return spring is missing. This is why the pinion is touching the edge of the ring gear. Quote Link to comment Share on other sites More sharing options...
timbo Posted September 3, 2012 Share Posted September 3, 2012 Just taken some photos of the spare i have in my garage. There is a plastic sleeve which contains the return spring and is held in place by the thin nut. Cant post the pics from ipad! The sleeve should be hard against the pinion and only moves when the drive shaft rotates. Are the nut and spring still in the bottom of the engine bay somewhere? I can send you the spring, sleeve and nut if not but you will have to hang on for a few days. The spare one is u/s anyway and if I ever repair it I can easily swap the nut over from another one. Cheers Timbo Quote Link to comment Share on other sites More sharing options...
BRDM Driver Posted September 4, 2012 Author Share Posted September 4, 2012 Got my spare engines from Withams yesterday and rigged up a hoist to open the cases today. I saw what is supposed to be on the end of the starter and I am in the process of swapping the whole starter over. I think getting the nut, sleeve and spring off is really tricky in situ as the trying to undo the nut makes the sleeve move and it pushes the spanner off. I couldn't see any easy way of holding the shaft still while undoing the nut. Once I got the seat and bulkhead out, it's pretty easy to swap the starters over. Cheers for the info and help. Quote Link to comment Share on other sites More sharing options...
robin craig Posted September 5, 2012 Share Posted September 5, 2012 Be aware,if you get a problem with the starter not working properly it can be masking a problem of battery voltage. We have had that with CVRT / Stormer a few times. R Quote Link to comment Share on other sites More sharing options...
BRDM Driver Posted September 6, 2012 Author Share Posted September 6, 2012 New starter in and working a treat... no more Drrringggg.... Next things to sort are the rev counter and the blown fuse for the temp and oil warning lights... Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.