Vulture Posted November 18, 2011 Share Posted November 18, 2011 Guys, a total noob :n00b: question here in relation to my CCKW... :blush: :embarrassed: I had a bit of time this afternoon, thought I'd put in the new points I recently picked up from Rex Ward. With my older cars I used to turn them over by hand using the fixed fan on the crank, but of course that's not an option here. So I get the starting handle out for the first time, as I know I need to rotate the engine until the the points open. Walk to front of truck with handle.... Ahhhh, bleep bleep winch is in the way, time to check manual... What the **** ? :shocked:Apparently I need to unwind the entire cable (which just know won't go back as tidy) !!! :nut: :mad: Someone, anyone, please tell me there is another way of slowly turning the engine over.... Kind regards to all Vulture Quote Link to comment Share on other sites More sharing options...
Richard Farrant Posted November 18, 2011 Share Posted November 18, 2011 Someone, anyone, please tell me there is another way of slowly turning the engine over.... Kind regards to all Vulture Try tightening the fan belt, removing plugs and it should turn over easily by gripping the fan. Quote Link to comment Share on other sites More sharing options...
N.O.S. Posted November 18, 2011 Share Posted November 18, 2011 If you push hard down on the fan belt to momentarily increase tension and then turn the fan you should find it will turn the crank. Alternatively drop the tin cover underneath the bellhousing and lever the flywheel. Edit: Aha - I see RF has beaten me to it :-D Quote Link to comment Share on other sites More sharing options...
Richard Farrant Posted November 18, 2011 Share Posted November 18, 2011 If you push hard down on the fan belt to momentarily increase tension Edit: Aha - I see RF has beaten me to it :-D Tony, You mentioned the bit I forgot,.............................. if the belt still slips when turning the fan push your fist against one of the runs and it will grip more. This way you can often keep an eye on the points as you turn it over. Quote Link to comment Share on other sites More sharing options...
deadline Posted November 19, 2011 Share Posted November 19, 2011 The starter is right next to the distributor. Use a long flat bar to bump the starter until the points are on the top of a lobe and set the gap. http://www.vehiclesofvictory.com has a 'starter tool' on their web site that does just this. I'm sure mechanics in WWII used something similar.... a winch is nice, but it mostly gets in the way. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.