Wiggy Posted May 11, 2010 Share Posted May 11, 2010 My MWD isn't charging. I looked in little box that houses a link fuse in front of the regulator box. The fuse wire on this link is broken, could this be the reason for the loss of charging and also does anyone know what size the fuse wire is. Any help would be appreciated. Quote Link to comment Share on other sites More sharing options...
Richard Farrant Posted May 11, 2010 Share Posted May 11, 2010 My MWD isn't charging. I looked in little box that houses a link fuse in front of the regulator box. The fuse wire on this link is broken, could this be the reason for the loss of charging and also does anyone know what size the fuse wire is. Any help would be appreciated. That is the dynamo fuse, it should be 22 amp. Quote Link to comment Share on other sites More sharing options...
Wiggy Posted May 11, 2010 Author Share Posted May 11, 2010 Thankyou very much, hopefully changing that will cure the problem then. Alot cheaper than what I was going to do ie; dynamo & regulator. Think I need to get a manual! Quote Link to comment Share on other sites More sharing options...
Richard Farrant Posted May 11, 2010 Share Posted May 11, 2010 Thankyou very much, hopefully changing that will cure the problem then. Alot cheaper than what I was going to do ie; dynamo & regulator. Think I need to get a manual! If it blows again, then you will have to check it out, might be a wiring problem... Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.