Fully Rebuilt Willys MB Engine ‘42 - MB132137

[JackRobinson]

1942 Willys MB Engine - Serial Number MB-132137
Build date stamped on the sump face is - 3-10-42
Engine has been fully rebuilt with no expense spared -
Crack around core plug professionally lock stitched 
Engine block was bored and sleeved back to standard bore 3.125”
Hardened exhaust valve seats fitted to accommodate running regular unleaded 
Inlet valve seats re-cut 
New valve guides fitted 
Brand new exhaust valves 
Brand new inlet valves 
Crank re-ground and polished - Mains 0.40 - Big ends 0.30’
All 4 connecting rods were re-sized 
Brand new pistons and rings 
Engine block skimmed 
Cylinder head skimmed 
New core plugs
New cam bearing 
Camshaft polished
New timing chain 
New head studs and nuts 
New manifold studs and nuts 
Rebuilt using Fel-Pro gasket set 
I have an album of over 50 pictures throughout the rebuild , if you are interested drop me a message and I’ll email them over to you 
Viewings more than welcomed 
I can arrange for this engine to be seen running on a test bed should you wish to see it before buying that’s no problem - if it hasn’t sold within the next couple of weeks I’ll get round to uploading a video of it running.
Will consider P/X for another jeep engine and/or parts 
Delivery can be arranged within reason - I’m based in Chester

£4500
Open to sensible offers

[jim connell]

i have a 44 mb l134 that machine shop said its got to many cracks, so a rebuilde in tx may have one for 1000 includes shipping to ca. a place in ark will have in a few weeks one that is turn key, just drop it in but price may be around 8000

or so and they run it several      times. if i can get the head from tx the rebuild will be with block and all about 5000, a big diff but the expensive on was pre run. yours am sure is sold. did you have all the work done for you. any advice. had lots of trouble with over-heating, did everthing and more to fix it but ???