Lmortimer334 Posted August 29, 2019 Share Posted August 29, 2019 Dear all, We need a replacement set of brake pipes for our Leyland Hippo. We have been down to our local hydraulic specialist and they cannot find what threads are on the ends. From the hydraulic company; "Righto so the steel pipe from brake servo to rear axles has split and corroded so it will need to be replaced from front to rear. Unfortunately the flexible hoses between chassis and axle have also gone but they cant work out what the thread is. The flexi then goes from the T piece by the diff. Then copper pipes goes from that to the brake cylinders. Also these copper pipes are crushed and 2 have splits in it them." Anyone got any help on this one? Quote Link to comment Share on other sites More sharing options...
7VHU Posted August 2, 2021 Share Posted August 2, 2021 If Lockheed, it’s UNF, flexi hose is an oddball UNF as well. Pipe fittings are very similar to JIC. Girling likely BSF happy hunting peter Quote Link to comment Share on other sites More sharing options...
7VHU Posted August 3, 2021 Share Posted August 3, 2021 Further updatePowetrack Ltd can supply the original type (Lockheed) front & rear brake hoses with the 11/16"x 16tpi end fittings with a 16.5" total length priced at £18.00 + VAT each.The next size up from this is a hose with the same fittings but a 18.50"total legth and these are priced at £20.00 each + VAT.Hoses are brand new or British origin. Www.powertrackbrakes.co.uk Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.