Tony B Posted September 11, 2007 Share Posted September 11, 2007 I'm trying to find the top cap of a WC51 master cylinder. I want to drill the top for a pressure bleeder. I've tried 1/2 inch BSP fittings, to small. the plug is about 1 1/8 inch across. I'm going to see if I can get a bigger fitting, does anyone know of a commercial available plastic plug that may do the trick? I haven't got access to a lathe unfortunately so can't cut one. Quote Link to comment Share on other sites More sharing options...
Enigma Posted October 23, 2007 Share Posted October 23, 2007 Drill the one you got and install a plug, done that myself because of brake issues... Actually I drilled it and put a inverted rifle shellcasing in it to fit a fillerhose into the casing... Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.