PB1954RNS Posted July 24, 2016 Posted July 24, 2016 Hi. Looking for a horn button that fits the steering column for the Albion BY5. I have a horn button/headlight dip that came off a Morris C9 that was in a Oxon scrap yard but would like to fit the correct type. If not available then I shall have to fit the Morris one but the Albion doesn't have dipped headlights so would look out of place. Have tried various vintage car web sites but they seem to be fitted to the dash board. Any member can help or point me in the right direction to get one, also if I can get the correct type then the Morris type will be offered on this site. Cheers. Paul Burns.
Ian Mastin Posted July 24, 2016 Posted July 24, 2016 G'day Paul, Do you have a photo of what you are looking for mate! I may have what you are after. Regards Ian Mastin Australia
PB1954RNS Posted July 24, 2016 Author Posted July 24, 2016 G'day Paul, Do you have a photo of what you are looking for mate! I may have what you are after. Regards Ian Mastin Australia Hi Ian. Couple of photos to show the type but without the dip switch. Cheers. Paul Burns.
wally dugan Posted July 24, 2016 Posted July 24, 2016 PAUL may have one in the bits box will look tomorrow for you
PB1954RNS Posted July 24, 2016 Author Posted July 24, 2016 PAUL may have one in the bits box will look tomorrow for you Hi. Many,many thanks if you can find one for me, if not then no worries I shall restore the one I have. Cheers. Paul Burns.
Ian Mastin Posted August 4, 2016 Posted August 4, 2016 Hi Paul, Sorry mate for not getting back to you, got a bit side tracked in regards to horn button sorry again I've got what you've got if I come across one will let you know. Regards Ian
PB1954RNS Posted August 5, 2016 Author Posted August 5, 2016 Hi Paul, Sorry mate for not getting back to you, got a bit side tracked in regards to horn button sorry again I've got what you've got if I come across one will let you know. Regards Ian Hi Ian. Not a problem at all, do you know of any sites or groups out in Australia that might have any Albion parts as I'm still looking for a complete rear diff to fit the BY5. Cheers. Paul.
Recommended Posts