Surveyor Posted February 28, 2016 Share Posted February 28, 2016 Hi Does any one have a good specification for a post which could be used to winch vehicles up a 30 degree slope, thinking of a land rover plus kit, assuming about 3,500 Kgs. Thinking out load I want to consider an adaption for a garage wall Richard Quote Link to comment Share on other sites More sharing options...
robin craig Posted February 29, 2016 Share Posted February 29, 2016 I think you are not getting replies because perhaps like myself people do not quite understand the question. It sounds like you want to winch a Land Rover into a garage that has a 30 degree slope outside. Is that the question? My questions are:- 1 why can the vehicle not drive in under it's own power? 2 where is the winch mounted and what powers the winch? 3 Perhaps a picture of the garage and approach area would help us Regards Robin Quote Link to comment Share on other sites More sharing options...
R Cubed Posted February 29, 2016 Share Posted February 29, 2016 If that is the situation as above reply, use a plate with loop in the front of it and bolt to concrete floor, but floor needs to be in good unbroken condition and fairly thick. I would never bolt to a wall as you could just pull the bricks or blocks out which the anchor is fixed to. Quote Link to comment Share on other sites More sharing options...
.thumb.png.4854fbb26292d396a6b90659a3d1c4e2.png)
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.