POPPY Posted June 11, 2015 Share Posted June 11, 2015 http://1944 LAAT Hi all, Could anyone kindly sign post me in the right direction. I am looking for a right hand water pump for my Canadian Ford F60 flathead v8. My water pump seized last week and I am having great difficulty finding a spare! kind regards, Mark Towers 1944 CMP F60 LAAT 1942 Canadian 40mm Bofors Gun 1940 BSA M20 Quote Link to comment Share on other sites More sharing options...
0 cosrec Posted June 12, 2015 Share Posted June 12, 2015 Don't know the vehicle or pump but get it of somebody some where will make it good for you Quote Link to comment Share on other sites More sharing options...
0 Maurice Posted June 12, 2015 Share Posted June 12, 2015 Some Canadian Ford water pumps have the same bearing as a Jeep water pump , so worth a try to rebuild . Quote Link to comment Share on other sites More sharing options...
0 MB1944 Posted June 12, 2015 Share Posted June 12, 2015 Belcher Engineering carry all the spares to rebuild these pumps 01379 8900913. Best regards John Quote Link to comment Share on other sites More sharing options...
0 CMP-Phil Posted June 12, 2015 Share Posted June 12, 2015 Hi Mark Where are you located? Might help source part, several sources in the US but shipping maybe as much as the part. On other forums there have been discussions of rebuilding water pumps. Good looking truck. Cheers Phil Quote Link to comment Share on other sites More sharing options...
0 ajmac Posted June 13, 2015 Share Posted June 13, 2015 Rebuilding is not too difficult, I brought a pair of rebuild kits while in the U.S. and did the job in the garage just using a large vice, a punch and a hammer. The bearing kits come with new seals. There are a number of different variations of flathead water pump so make sure to order the correct kit. Quote Link to comment Share on other sites More sharing options...
0 ajmac Posted June 13, 2015 Share Posted June 13, 2015 Just located the photos from my engine rebuild. Forgot to to say that the rebuild kits come with a new impeller too. Quote Link to comment Share on other sites More sharing options...
0 MB1944 Posted June 13, 2015 Share Posted June 13, 2015 The parts are readily available in this country as I already stated, we have purchased second hand bodies from the sam source, as they used to offer rebuilt units but no longer offer this service. I have rebuilt three now and the important thing to remember is that the cast iron face for the seal must be good and flat and true to the centre line of the pump shaft or you will end up with a leaky pump. Best regards John Quote Link to comment Share on other sites More sharing options...
0 POPPY Posted June 14, 2015 Author Share Posted June 14, 2015 The parts are readily available in this country as I already stated, we have purchased second hand bodies from the sam source, as they used to offer rebuilt units but no longer offer this service. I have rebuilt three now and the important thing to remember is that the cast iron face for the seal must be good and flat and true to the centre line of the pump shaft or you will end up with a leaky pump. Best regards John Hi all ! Thank you very much for your sound advice .... I have some good friends that can help me with the re-build option ...😄 I will post some pics in due course. kind regards, Mark Quote Link to comment Share on other sites More sharing options...
Question
POPPY
http://1944 LAAT
Hi all,
Could anyone kindly sign post me in the right direction.
I am looking for a right hand water pump for my Canadian Ford F60 flathead v8.
My water pump seized last week and I am having great difficulty finding a spare!
kind regards,
Mark Towers
1944 CMP F60 LAAT
1942 Canadian 40mm Bofors Gun
1940 BSA M20
Link to comment
Share on other sites
8 answers to this question
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.