lozzaboy Posted February 12, 2015 Share Posted February 12, 2015 Yesterday I set about fitting a pair of NOS ATU cables in my FFR that runs from the rear bulkhead to the Larkspur ATU's on the front wings, does anyone know or have pics of the routing for the cables as they run under the vehicle as there seems to be a load of slack that needs to be taken up. Quote Link to comment Share on other sites More sharing options...
Rover8FFR Posted February 13, 2015 Share Posted February 13, 2015 Pete They run along the tops of the chassis rails in an armoured flexible conduit secured with P clips. My seatbox is out for the gearbox so I will take a couple of pics for you and upload as soon as I can. Cheers Wayne Quote Link to comment Share on other sites More sharing options...
lozzaboy Posted February 13, 2015 Author Share Posted February 13, 2015 Cheers mate Thank you :-) Quote Link to comment Share on other sites More sharing options...
Rover8FFR Posted February 17, 2015 Share Posted February 17, 2015 Matt Ive peeked inside my toastie to see where the co-axial cabling goes. Having the seatbox out was perfect timing for you..... I hope these all are useful. The last image shows the cable secured to one of the captive nuts instead of lower down on the inner wing for storage. Once fixed to the ATU's the last two P clips are used on the wing top. You might be able to see the screws still in-situ on mine or yours. :cool2: Best Wishes. Hope these help mate Wayne Quote Link to comment Share on other sites More sharing options...
lozzaboy Posted February 17, 2015 Author Share Posted February 17, 2015 Mate those pics are such a great help thank you :-) wasn't sure with the drivers side storage point was as I couldn't find any holes that matched the bracket, thinking it'd be roughly the same area as the other side but clearly not, time to get routing and fixing :-) Quote Link to comment Share on other sites More sharing options...
Rover8FFR Posted February 17, 2015 Share Posted February 17, 2015 Mate those pics are such a great help thank you :-) wasn't sure with the drivers side storage point was as I couldn't find any holes that matched the bracket, thinking it'd be roughly the same area as the other side but clearly not, time to get routing and fixing :-) Great stuff. Glad the images helped. Yes! they are different on either side of the vehicle as the drivers side runs up the side of the pedal box to top of bulkhead then around to inner wing. Passenger side runs under the pedal box and then through the gap into the engine bay by the splash guards. You can just make out the P Clip on the footwell where its fixed. They weren't precisely drawn, so as long as you follow the routing of mine you will be spot on! Quote Link to comment Share on other sites More sharing options...
lozzaboy Posted February 17, 2015 Author Share Posted February 17, 2015 Thanks again mate, time to get them sorted out :-) Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.