maxwell Posted August 28, 2014 Share Posted August 28, 2014 Hi people, I've a 51 Hotchkiss Jeep, Just started making weird clunking noise from grearbox I think? When clutch pressed down no noise, But when lifted either when in or out of gear clunking noise appears!! Any help in figuring out what it is & how to fix would appreciated?? Thanks Quote Link to comment Share on other sites More sharing options...
mash Posted August 28, 2014 Share Posted August 28, 2014 Possibly the shaft bearings in the gearbox. Quote Link to comment Share on other sites More sharing options...
maxwell Posted August 29, 2014 Author Share Posted August 29, 2014 Many Thanks, Gearbox out then I take it? Bigger wallet needed. Quote Link to comment Share on other sites More sharing options...
mash Posted August 29, 2014 Share Posted August 29, 2014 Yes it would be gearbox out, money wise it depends how handy with spanners you are, the box would be a simple design and could be done at home. Quote Link to comment Share on other sites More sharing options...
Pete Ashby Posted August 29, 2014 Share Posted August 29, 2014 If you do the job your self a rebuild on the gear box should be around £300-£350 mark in parts be wary of cheaper reproduction components the tolerance and quality can be questionable. Check all parts against factory specs and replace if required, don't short cut this as you'll only waste your time and money. Check the transfer case for worn components and seals while everything is on the bench. Pete Quote Link to comment Share on other sites More sharing options...
Tony B Posted August 29, 2014 Share Posted August 29, 2014 (edited) Could be the release bearings on the clutch or the clutch itself. , much cheaper. Still an engine out job. Does the pedal feel normal when operting? I don't know how the clutch on one them works, is it Hydraulic or mechanical, if so check adjusters. Also get a crowbar and check engine and gearbox mounts. Edited August 29, 2014 by Tony B Quote Link to comment Share on other sites More sharing options...
maxwell Posted August 30, 2014 Author Share Posted August 30, 2014 Thanks Guys, Going to have a go sorting gearbox with mates. Wish us luck we need it!! Arrrrrrrrgh Quote Link to comment Share on other sites More sharing options...
Tony B Posted August 30, 2014 Share Posted August 30, 2014 If it is the box needs rebuilding, think about going the whole hog, new clutch and plate and definitly release bearings. Whilst its out do the lot. Saves a lot of pain and effort in the future. Quote Link to comment Share on other sites More sharing options...
maxwell Posted August 31, 2014 Author Share Posted August 31, 2014 OK Tony, Thanks for advise Quote Link to comment Share on other sites More sharing options...
Tony B Posted September 1, 2014 Share Posted September 1, 2014 Just experience. :-D Fit one new bit, and the rest go like Dominos. Quote Link to comment Share on other sites More sharing options...
Degsy Posted September 1, 2014 Share Posted September 1, 2014 Could I suggest you join the G503 forum, all the help and info you need is on there. Best of luck with your repairs. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.