We have ordered parts twice for this rebuild job and received the same part number of unfinished bearing sets twice, in their current state they are about .015" too big They will be awkward to turn down.
Does anyone know if they only come unfinished?
We have no capability to line hone the block with them installed, they would have to be mounted into a jig and put in a lathe and pressed out again and then installed to the block, a whole rigamarole we do not want to do.
Question
robin craig
We have ordered parts twice for this rebuild job and received the same part number of unfinished bearing sets twice, in their current state they are about .015" too big They will be awkward to turn down.
Does anyone know if they only come unfinished?
We have no capability to line hone the block with them installed, they would have to be mounted into a jig and put in a lathe and pressed out again and then installed to the block, a whole rigamarole we do not want to do.
Any suggestions please?
R
Link to comment
Share on other sites
11 answers to this question
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.