Lynx22B Posted June 29, 2011 Posted June 29, 2011 Does anyone have the instructions for the removal of the torsion bars? Can't find the info. Quote
andym Posted June 29, 2011 Posted June 29, 2011 (edited) There is a separate Abbot repair manual but it's the same as the 432s, for which there are a plentiful supply of manuals. This one should do you: http://www.ekmpowershop5.com/ekmps/shops/greenmachines/fv432carrier-personnel-full-tracked-mk1112-and-21-technical-handbookunit-repairs-1311-p.asp Andy Edited June 29, 2011 by andym Quote
0644hunt Posted July 4, 2011 Posted July 4, 2011 Hi, you need to start by looking at the other side to the wheel station you are trying to remove. From memory ... remove the 2 caps top and bottom and remove the pins. I think it should then slide out. Just hope it is not snapped in half as you have to then get the remaining bit out. Use a scafaulding pole for this to jam onto the broken bit. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.