Mettlen Posted December 7, 2010 Share Posted December 7, 2010 Hi All, Can anyone help, I'm after the Saracen Service Manual, Army Code No.14250 (D/DME(A)123/11/13)? I've tried all the usual commercial outfits without success!!!! I'm quite happy to pay costs. It seems to be the holy grail of of Saracen literature!!!! Thanks in Advance Quote Link to comment Share on other sites More sharing options...
fv1609 Posted December 7, 2010 Share Posted December 7, 2010 PM me with your email & I'll scan it for you. Quote Link to comment Share on other sites More sharing options...
fv1609 Posted December 7, 2010 Share Posted December 7, 2010 Right got your PM. I just have to find it now! It shows up in my list of books. I've looked through the 3 main binders of Servicing Schedulkes & not there but need to rummage a bit longer I think. Quote Link to comment Share on other sites More sharing options...
montie Posted December 7, 2010 Share Posted December 7, 2010 PM me with your email & I'll scan it for you. Hi Clive, May I have a copy as well, please? I will take the audacity to pm you my e-mail address as well. Thanks in advance. Quote Link to comment Share on other sites More sharing options...
fv1609 Posted December 7, 2010 Share Posted December 7, 2010 Hi Clive, May I have a copy as well, please? I will take the audacity to pm you my e-mail address as well. Thanks in advance. Monty that's perfectly ok, I was going to suggest that anyone else who also wants the pdf to PM. All I ask is that if you do pass it on credit me with having done it & if you print off copies to sell please cut me in! I have to say it is a very badly produced publication. At first I tried to scan it without disturbing the staples then I realised some of the pages had been inserted back to front. When scanning I found that not only were some pages of different sizes but some were cut asymmetrically. Quote Link to comment Share on other sites More sharing options...
montie Posted December 7, 2010 Share Posted December 7, 2010 Monty that's perfectly ok, I was going to suggest that anyone else who also wants the pdf to PM. All I ask is that if you do pass it on credit me with having done it & if you print off copies to sell please cut me in! I have to say it is a very badly produced publication. At first I tried to scan it without disturbing the staples then I realised some of the pages had been inserted back to front. When scanning I found that not only were some pages of different sizes but some were cut asymmetrically. Thank you very much Clive, I have no problem with that, I seem to be rather lonely in this part of the world regarding this hobby! Quote Link to comment Share on other sites More sharing options...
DP1981 Posted December 7, 2010 Share Posted December 7, 2010 pm inbound also Clive. When you create the PDF you can watermark the file as it's creator also. I might start hosting manuals etc as i collect them online using googledocs or such. thanks Declan. Quote Link to comment Share on other sites More sharing options...
fv1609 Posted December 7, 2010 Share Posted December 7, 2010 OK Declan, I wasn't quite wanting to mark stuff too exclusively because it certainly isn't my copyright. But documents I scan & circulate I now mark in a number of ways that give characteristics that I can identify, some I hope are less than obvious. But thanks, I might investigate what sort of watermarks the pdf writer can produce. The problem with documents, one shouldn't try & hog the material, but on the other hand I had to buy the publications & spend time scanning it. It is annoying when this stuff ends being either credited to someone else for doing it or finding reprints for sale that are based on my scans. Quote Link to comment Share on other sites More sharing options...
REME 245 Posted December 8, 2010 Share Posted December 8, 2010 The Tank Museum were selling originals in their shop for a long time but there were none there on Sunday. Quote Link to comment Share on other sites More sharing options...
saracenstump Posted December 8, 2010 Share Posted December 8, 2010 pm sent clive Quote Link to comment Share on other sites More sharing options...
Pete55wright Posted August 13 Share Posted August 13 Hi, just came across this thread. I was wondering how I could get a copy of the manual at all? Quote Link to comment Share on other sites More sharing options...
fv1609 Posted August 17 Share Posted August 17 Been a few years, but I have got it somewhere just a case finding it! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.