Jump to content

Making CVR(W) Fox parts PT 2

robin craig

Recommended Posts

Here is the making of a pair of brackets that holds the front of the fan assembly to the engine block. You can see that we were sold a vehicle with two parts of the same hand, one being bodged in an attempt to make it fit. I elected to keep the correct original one in our parts inventory and make a matching pair of replacement brackets.


I seem to be missing the last photo which shows the finished bracket. I welded on a piece of round bar stock over the hole on the bracket, cut it to length and then drilled through it to finish the fabrication.



various MV 006.jpg

various MV 033.jpg

various MV 035.jpg

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Create New...