50 cal ( † RIP † ) Posted August 16, 2010 Share Posted August 16, 2010 im having trouble getting the right inner tubes for my 1/2 ton the wheels are offset for the hole for the inner tube i got some offset tubes but the valve will rub on the brake drum because its straight,i have seen bent valve ones but these are not offset is there a special tube i can get or what should they have on thanks mark Quote Link to comment Share on other sites More sharing options...
Tony B Posted August 16, 2010 Share Posted August 16, 2010 Have you tried the valave length adapters used on trucks and vans? They are prety malleable Quote Link to comment Share on other sites More sharing options...
Gordon_M Posted August 16, 2010 Share Posted August 16, 2010 You can get 45 and 90 degree adaptors, and varying lengths of straights, which should solve this. I always managed to get them to fit, but them I'm using the earlier half and one ton Budd disc wheels and not the half ton WC ones. Gordon Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.