teletech Posted January 15, 2023 Share Posted January 15, 2023 Does somebody have good shots of the inside of a tidy cluster assembly? I know there is some aspect of this that is a result of additions and the repower, but mine is a total box of spaghetti, with most of the wires being pretty orderly, but then two or three dozen crossing over, through, behind, dangling loose... What's it supposed to look like? Obviously A/C was a wire left for the future. What's hotstartsol useful for? I know it goes to the starter, but on the cluster end it's just loose. It's loose on the schematic I have as well. Did it ever do anything? Quote Link to comment Share on other sites More sharing options...
teletech Posted January 26, 2023 Author Share Posted January 26, 2023 (edited) I'd also love to know the correct cable routing and strain relief for the cable between the wiper motor and the instrument cluster. I did find some decent pictures of the outside of the console and digging in I found the hot-start-solinoid system was for extreme cold-weather (likely either) and was deleted at some point. Edited January 26, 2023 by teletech Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.