I am looking for the original measurements of the wooden blocks that sit in the running board/side step brackets for the Dodge WC11.
Mine has none, so the steps are sitting too low with a gap between them and the bottom of the body. It would be a simple enough job to just custom make a set so the steps sit at the right hight, but i would like to have the original measurements if possible.
The rear bracket on the side shown in this photo bends down a bit and needs bending back up which will help reduce the gap a little, then the wooden blocks will do the rest.
Question
Keith-wc42
(This job has een done now)
I am looking for the original measurements of the wooden blocks that sit in the running board/side step brackets for the Dodge WC11.
Mine has none, so the steps are sitting too low with a gap between them and the bottom of the body. It would be a simple enough job to just custom make a set so the steps sit at the right hight, but i would like to have the original measurements if possible.
The rear bracket on the side shown in this photo bends down a bit and needs bending back up which will help reduce the gap a little, then the wooden blocks will do the rest.
Thanks.
Link to comment
Share on other sites
1 answer to this question
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.