FUGLYONE Posted September 7, 2020 Share Posted September 7, 2020 I am looking for any Ferret wheel station parts to help get a ferret back on its wheels. I am looking for any parts, NOS or parts you have taken off and kept? As long as they are usable I don't mind work in dismantling, cleaning, blasting etc to get the parts into a usable condition? I also need a coil spring, and an off side engine cover. If I can get these parts together then its a worthwhile project, but the vehicle is borderline parts donor itself. Better if it could be put back together. I am in Derbyshire , but am happy to travel. Here is my wish list: Engine cover ( O/S) Coil spring Wishbones (any) Driveshafts / joints Hub parts (Etc) Brake drums - Brake parts Longer term I am after all the tinny bits that rust, but that's a long way off at the moment. Please let me know what you have and a price . 07866 367059 Thanks Quote Link to comment Share on other sites More sharing options...
REME 245 Posted September 7, 2020 Share Posted September 7, 2020 Have you tried Banisters? Quote Link to comment Share on other sites More sharing options...
tankdiver Posted September 7, 2020 Share Posted September 7, 2020 I have a couple of boxes of NOS hub gears eg sun wheels ,I think annulus, 2 hub s planet holders bearings .I also have a box of various hub parts covered in grease old stock probably need cleaning. I have done a few centre bins for my Ferrets and friends Ferrets but they are a pain and use a lot of sheet steel and take about 2 weeks to do. If you are interested I will send you some pictures Laurence Quote Link to comment Share on other sites More sharing options...
FUGLYONE Posted September 10, 2020 Author Share Posted September 10, 2020 (edited) On 9/7/2020 at 10:10 PM, tankdiver said: I have a couple of boxes of NOS hub gears eg sun wheels ,I think annulus, 2 hub s planet holders bearings .I also have a box of various hub parts covered in grease old stock probably need cleaning. I have done a few centre bins for my Ferrets and friends Ferrets but they are a pain and use a lot of sheet steel and take about 2 weeks to do. If you are interested I will send you some pictures Laurence Yes please ! I am interested, but have not worked out how to send a PM, please can you give me a call ? 07866 367059 Edited September 10, 2020 by FUGLYONE Quote Link to comment Share on other sites More sharing options...
phil4280 Posted October 10, 2020 Share Posted October 10, 2020 Just a heads up. The brake assemblies are the same as the FV1600 1 ton Humber. Just the hand brake cable is different. Phil... 1 Quote Link to comment Share on other sites More sharing options...
FUGLYONE Posted October 11, 2020 Author Share Posted October 11, 2020 16 hours ago, phil4280 said: Just a heads up. The brake assemblies are the same as the FV1600 1 ton Humber. Just the hand brake cable is different. Phil... Thanks Phil, I could do with two new backplate assemblies. Quote Link to comment Share on other sites More sharing options...
tankdiver Posted October 12, 2020 Share Posted October 12, 2020 Hi not got an email regarding parts yet Laurence Quote Link to comment Share on other sites More sharing options...
FUGLYONE Posted October 13, 2020 Author Share Posted October 13, 2020 Hi Laurence, I have sent you an email as a reply to one you sent me a few weeks ago, should be in your inbox now . Regards James Quote Link to comment Share on other sites More sharing options...
Exclusive Cars Of SA Posted December 17, 2020 Share Posted December 17, 2020 Hi Fuglyone , how is the project coming along ? Quote Link to comment Share on other sites More sharing options...
FUGLYONE Posted December 19, 2020 Author Share Posted December 19, 2020 Hi - so far I have been lucky. I bought the back end of a ferret complete with two wheelstations, and two bevel boxes. Then I was offered a mark 1/2 turret which is correct for the vehicle. The hull is completely stripped and my parts store is slowly building up. I found the brake drums, rear backplates and another 2 parts wheelstations. I have all the propshafts. After finishing stripping the hull out, I freed off all the hatches, and am needle gunning the hull. Its quick and cheap, and I can do in sections. Engine is "soaking". Gearbox not touched yet. Quote Link to comment Share on other sites More sharing options...
robin craig Posted December 20, 2020 Share Posted December 20, 2020 I have some parts, battery box lids, 7.62 gpmg craddle, eyebrow pads for hatches, some fluid flywheel tools and a fw other bits and bobs, contact me via email from here is fine Quote Link to comment Share on other sites More sharing options...
FUGLYONE Posted December 20, 2020 Author Share Posted December 20, 2020 Thanks Robin, I will make a note of that and add it to my parts available list. Have you any spare wheelnuts? Quote Link to comment Share on other sites More sharing options...
robin craig Posted December 21, 2020 Share Posted December 21, 2020 yes I do, which handed they are I will have to look and see of both the wheel half nuts are the same as the wheel to hub nuts, otherwise i likely have the ones you dont need. Back back in a day or two Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.