diesel1 Posted September 24, 2016 Share Posted September 24, 2016 Can the large inspecton hatch and fuel sender be removed with the turn table thing still in place? removal of the curved plate which is bolted on the turn table in front of the fuel inspection hatch may make things a little easier. i intend to clean the fuel tank inside for piece of mind if its not too difficult Andrew Quote Link to comment Share on other sites More sharing options...
BRDM Driver Posted September 25, 2016 Share Posted September 25, 2016 Can the large inspecton hatch and fuel sender be removed with the turn table thing still in place? removal of the curved plate which is bolted on the turn table in front of the fuel inspection hatch may make things a little easier. i intend to clean the fuel tank inside for piece of mind if its not too difficultAndrew Yes. See my post re fuel tank on Scorpion. I did take the seat out though. Just one nut and bolt and the seat pops up off it's spring. I tried to get the seat out of the hatch but it appears to be a very tight fit, so i just put it to one side in the turret... The lower bolts on the access panel are tricky to get at, but do-able. I ran a die over all the stud threads before undoing them to get the paint off, so avoid the studs coming out. Quote Link to comment Share on other sites More sharing options...
diesel1 Posted September 26, 2016 Author Share Posted September 26, 2016 Thanks, most helpful :-D UOTE=BRDM Driver;476111]Yes. See my post re fuel tank on Scorpion. I did take the seat out though. Just one nut and bolt and the seat pops up off it's spring. I tried to get the seat out of the hatch but it appears to be a very tight fit, so i just put it to one side in the turret... The lower bolts on the access panel are tricky to get at, but do-able. I ran a die over all the stud threads before undoing them to get the paint off, so avoid the studs coming out. Quote Link to comment Share on other sites More sharing options...
diesel1 Posted October 9, 2016 Author Share Posted October 9, 2016 Yes. See my post re fuel tank on Scorpion. I did take the seat out though. Just one nut and bolt and the seat pops up off it's spring. I tried to get the seat out of the hatch but it appears to be a very tight fit, so i just put it to one side in the turret... The lower bolts on the access panel are tricky to get at, but do-able. I ran a die over all the stud threads before undoing them to get the paint off, so avoid the studs coming out.[/QUOT I will be cleaning the sabre fuel tank out this week, just taken the seats out and other stuff, lots of room now! Does the fuel sender need taking out first then the big plate or can the big plate come out in 1 lump with everything on it? Andrew Quote Link to comment Share on other sites More sharing options...
sirhc Posted October 9, 2016 Share Posted October 9, 2016 Take it out in one lump. Quote Link to comment Share on other sites More sharing options...
diesel1 Posted October 9, 2016 Author Share Posted October 9, 2016 Take it out in one lump.[/quote Thanks, hope to do that this week, wish i hadnt have put 160litres of fuel in it the other week! Andrew] Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.