Gwyn Evans Posted December 23, 2015 Author Share Posted December 23, 2015 If you don't mind some simple fabrication and have a camera with a tripod screw thread it would be possible to make your own selfie stick: 1/4" Whitworth thread bolt (check size on your camera), 3 metres metal electrical conduit/pipe for the stick, tripod to clamp the pipe part way down for stability, long cable release, small flash, wide angle lens setting, small aperture for depth of field. Bit of messing about but cheaper than a drone if you don't already have one. Putting a tripod inside to support a stick with a camera with wide angle lens is a good idea. This could be do-able. Thank you. Gwyn Quote Link to comment Share on other sites More sharing options...
Gwyn Evans Posted December 23, 2015 Author Share Posted December 23, 2015 One of these would probably do the trick. I've no idea if they can be hired. http://www.inline.com.au/snakeeye-pole-camera Nic They're certainly long enough Nic. Many thanks. Gwyn Quote Link to comment Share on other sites More sharing options...
MatchFuzee Posted December 23, 2015 Share Posted December 23, 2015 This video camera would appear to focus over several metres, so if you attach it to a pole, you should be able to move it inside the tank and locate the numbers:- Quote Link to comment Share on other sites More sharing options...
Richard Farrant Posted December 23, 2015 Share Posted December 23, 2015 It will be pitch black in there and the door on the rear is not very large and who ever is holding the camera will block out any available daylight. Ideally you need a lamp on the camera. regards, Richard Quote Link to comment Share on other sites More sharing options...
Nic.Clay Posted December 23, 2015 Share Posted December 23, 2015 http://www.brandontoolhire.co.uk/en/site-works-and-safety/454-seesnake-inspection-camera.html The Ridgid SeeSnake Inspection Camera makes it easier for you to perform visual inspections in hard to reach areas. Its lightweight, handheld design means that it can be carried almost anywhere, providing solutions when and where you need them. It allows you to see and do more, inspect and reach “unreachable” wall cavities, ductwork, utility boxes and hundreds of other dark, hidden spaces. The unit is equipped with a semi-flexible 90 cm cable with a camera head which sends images to an LCD screen. The cable can be extended to 9 metres and is water-resistant to 3 metres. A hook or magnet for retrieving objects can be fitted to the camera head, or a mirror for inspecting from a different angle. The unit is supplied in a handy carry-case. Features Display – 2,5” Monitor LCD (160 x 234 resolution). Attachments – Mirror, hook and magnet. Camera size – 17 mm diameter. Lighting – 2 adjustable LED’s. Weight – 0,5 kg. Power Source – 4 AA batteries. Waterproof – Camera and cable to 3 metres depth Cable reach – 90 cm; extendable to 9 metres with optional extensions No ... I'm not on commission. Nic Quote Link to comment Share on other sites More sharing options...
Gwyn Evans Posted December 23, 2015 Author Share Posted December 23, 2015 It will be pitch black in there and the door on the rear is not very large and who ever is holding the camera will block out any available daylight. Ideally you need a lamp on the camera. regards, Richard True, though I was hoping that I could use a flash which would solve the problem (fingers crossed). If just using a mirror on a stick the lack of a light source would be a problem though. Gwyn Quote Link to comment Share on other sites More sharing options...
Gwyn Evans Posted December 23, 2015 Author Share Posted December 23, 2015 No ... I'm not on commission. Nic I'll believe you Nic... Actually this is a good solution for another reason - I won't have to bring the thing all the way from Wales. Thanks very much everyone. Gwyn Quote Link to comment Share on other sites More sharing options...
Richard Farrant Posted December 24, 2015 Share Posted December 24, 2015 (edited) Hi Gwyn, I took a few photos today of the Ashford MkIV with my phone. Light was not good, but it shows a few things that I have mentioned, stress fractures in the sides behind RH front track idler, can be seen down the left hand band of white paint. This is due to rust building up on the inside between the riveted joint and putting increasing pressure on the plate for many years. Another photo of along the bottom can be seen of short lengths of steel angle, either bolted or riveted to the sides, there is about half an inch of rust build up that is forcing the angles away from the sides. The door at the rear is very small as can be seen here. There is no chance of seeing any steelworks name on the steel angle due to the amount of paint. Edited December 24, 2015 by Richard Farrant added last sentence. Quote Link to comment Share on other sites More sharing options...
Gwyn Evans Posted December 24, 2015 Author Share Posted December 24, 2015 Richard I am most grateful to you for your time and trouble. With Seasons Greetings Gwyn Quote Link to comment Share on other sites More sharing options...
Gwyn Evans Posted December 24, 2015 Author Share Posted December 24, 2015 Actually I think there might be something there. What I'm half-expecting to find is a HALLSIDE mark. I attach a photo showing one on 'Grit' (4643) and a marked-up photo showing an area where I think a mark might be. Would anyone in the area fancy taking another look for me, please? A torch can be helpful in finding these. Thanks. Gwyn Quote Link to comment Share on other sites More sharing options...
Richard Farrant Posted December 24, 2015 Share Posted December 24, 2015 Actually I think there might be something there. What I'm half-expecting to find is a HALLSIDE mark. I attach a photo showing one on 'Grit' (4643) and a marked-up photo showing an area where I think a mark might be. Would anyone in the area fancy taking another look for me, please? A torch can be helpful in finding these. Thanks. Gwyn Hi Gwyn, It is possible I may have missed any lettering on the iron work, but the AWM's Grit has not stood outside for 95 years with numerous coats of paint, and as such is a pristine example. Metal work inside might offer more proof as I recall little paint in there, but rust of course. Might be able to get another look next week as it is less than 2 miles away. Quote Link to comment Share on other sites More sharing options...
Gwyn Evans Posted December 24, 2015 Author Share Posted December 24, 2015 True enough of course. I was using 4643 as it is the clearest example, though I've found similar marks on the less pristine one in the USA. Thank you for your efforts on my behalf. Gwyn Quote Link to comment Share on other sites More sharing options...
ferretfixer Posted December 25, 2015 Share Posted December 25, 2015 Richard, Thank You! You have actually saved Me a job! Cheers! Quote Link to comment Share on other sites More sharing options...
Nic.Clay Posted January 25, 2016 Share Posted January 25, 2016 Appeared on ebay - 1 metre long 'arm' so perhaps not long enough? 2.4" LCD Video Inspection Borescope 1m Endoscope Pipe 9mm Camera Snake Scope New [TABLE=class: vi-bboxrev-tbl, width: 100%] [TR] [TD=class: vi-bboxrev-cntrcell] £37.99 RRP £64.99save £27.00 (41% OFF*) [/TD] [/TR] [/TABLE] Nic Quote Link to comment Share on other sites More sharing options...
Bushy Posted September 19, 2016 Share Posted September 19, 2016 Gwyn Did you get any further with identifying the Ashford Mk IV? Bob Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.