Right, I have had enough of the B***dy Humber! *kicks side of Pig*
Brakes have never been great! discovered a leak on the Master Cylinder.. on the push rod, So I did a seal repair kit... Leaked.. Replaced master cylinder...
Leaked.. Replaced all washers...cured!
But now i have very poor brakes! pulls to the left ! and Have bled them 3 times today, always has air in? but i cant find a leak or indeed work out why?
It had better brake ability with a shot master cylinder! I have brake pedal travel to the floor nearly...
If you watch the header tank for a while it bubbles...
would indicate air in the system? but we have bled and bled!
what would this suggest? a Shot Hydrovac? as with the engine off the brake pedal is normal and has good resistance and travel...
Can some one help, come over or tell me what the hell is wrong?
Question
paul connor
Right, I have had enough of the B***dy Humber! *kicks side of Pig*
Brakes have never been great! discovered a leak on the Master Cylinder.. on the push rod, So I did a seal repair kit... Leaked.. Replaced master cylinder...
Leaked.. Replaced all washers...cured!
But now i have very poor brakes! pulls to the left ! and Have bled them 3 times today, always has air in? but i cant find a leak or indeed work out why?
It had better brake ability with a shot master cylinder! I have brake pedal travel to the floor nearly...
If you watch the header tank for a while it bubbles...
would indicate air in the system? but we have bled and bled!
what would this suggest? a Shot Hydrovac? as with the engine off the brake pedal is normal and has good resistance and travel...
Can some one help, come over or tell me what the hell is wrong?
Am I overlooking something?
HELP ME! before i drive it into the sea!
Link to comment
Share on other sites
5 answers to this question
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.