Nitro Posted October 13, 2014 Share Posted October 13, 2014 Ok, so I have a 6 x 6 transfer box on my WC52. But the right hand lever is the 4x4 select which is disengaged to 2 wheel drive when pulled back! And the left lever is high and low range with lever forward for high range. Is this correct for a WC63 box? Think the box was fitted by the French army after the war, so goodness knows what if is. Any info much appreciated. Thanks. Quote Link to comment Share on other sites More sharing options...
Gordon_M Posted October 13, 2014 Share Posted October 13, 2014 Sounds almost right. I would have expected the range lever to be forward for low range though. It is possible someone may have assembled the linkage wrongly I suppose. Quote Link to comment Share on other sites More sharing options...
Nitro Posted October 13, 2014 Author Share Posted October 13, 2014 Yeah. The Range lever sounds about right, though should be on the other side. The 4x4 lever is backwards I'm sure. The linkages are all ok. Quote Link to comment Share on other sites More sharing options...
tankdriver Posted October 14, 2014 Share Posted October 14, 2014 Ok, so I have a 6 x 6 transfer box on my WC52. But the right hand lever is the 4x4 select which is disengaged to 2 wheel drive when pulled back!And the left lever is high and low range with lever forward for high range. Is this correct for a WC63 box? Think the box was fitted by the French army after the war, so goodness knows what if is. Any info much appreciated. Thanks. Here is the page from my WC62 / 63 operator manual....... Quote Link to comment Share on other sites More sharing options...
Nitro Posted October 14, 2014 Author Share Posted October 14, 2014 Thanks tank driver, that pic is how I thought the WC63 box worked. Though it is different to mine..... The plot thickens. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.