saracenstump Posted October 15, 2013 Share Posted October 15, 2013 hi all anyone know if a k9 headgasket needs a specific torque setting as the manual i've got says tighten down then half a turn each headnut in the sequence,but how tight?seems abit vague. Quote Link to comment Share on other sites More sharing options...
0 minidaffy Posted October 19, 2013 Share Posted October 19, 2013 hi, everything you need to know plus more you don't can be found here... http://campkahler.com/files/princess-manual.pdf. be ready for a 12mb download though! The k9 and princess share the same block/head so theres lots of usefull info for you there, valve clearance etc... Please bear in mind that if you skim a lot off a k9 head there is a risk the oil feed in the cylinder head to the rockers can become misaligned as it is on an angle, I found this out the hard way! Martin Quote Link to comment Share on other sites More sharing options...
0 saracenstump Posted October 21, 2013 Author Share Posted October 21, 2013 cheers martin Quote Link to comment Share on other sites More sharing options...
Question
saracenstump
hi all anyone know if a k9 headgasket needs a specific torque setting as the manual i've got says tighten down then half a turn each headnut in the sequence,but how tight?seems abit vague.
Link to comment
Share on other sites
2 answers to this question
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.