Zero-Five-Two Posted August 30, 2010 Share Posted August 30, 2010 Hi Guys, Need a bit of help with the starter wiring on the old Militant. 2 main terminals, which I assume are 1 positive and 1 negative, but which is which? They are both the same to look at, and there is no markings on or near either that I can see. I have put a test meter on them and neither of them run to a body earth. Also the soleniod/trigger feed, this also has 2 terminals, and again no markings. Can anyone help me sort out the pos from the neg? dont want to have a disaster by getting them the wrong way round. Thanks Zero-Five-Two Quote Link to comment Share on other sites More sharing options...
julezee001 Posted August 31, 2010 Share Posted August 31, 2010 (edited) Had a look at mine today. As you look at the starter from behind the drivers side wheel, the top/ furthest contact is the positive, the centre one the actuation wire, and the bottom/nearest is the negative, which on mine is bolted to the floor plate. I took a couple of photos. Hope that helps, Jules Edited August 31, 2010 by julezee001 Quote Link to comment Share on other sites More sharing options...
Simon Daymond Posted September 1, 2010 Share Posted September 1, 2010 aren't the terminals different sizes? Quote Link to comment Share on other sites More sharing options...
Zero-Five-Two Posted September 1, 2010 Author Share Posted September 1, 2010 Both terminals on mine are the same size, about the same amount of rust as Julezee's as well Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.