Jump to content

guy66

Members
 View Profile  See their activity

  • Posts

    744

  • Joined

  • Last visited

  • Days Won

    5

 Content Type 

Everything posted by guy66

  1. guy66
    Nice in the workshop for the moment! Making the radio table that sits in the front of the radio box, still need to make the frame for the radio operator seat.
  2. guy66
    It's dam cold outside; next week I will look to start with the construction of the radio table . But the welding and construction nice in the workshop !
  3. guy66
    I love all the energy you put in to the this project to get everything so close to original. super job 👍
  4. guy66
    Good luck , you even have a original engine .
  5. guy66
    In ful swing on the radio box floor, cutting and planing the planks for the floor. Made also the radio operator foot well that's fitted just under the radio table .
  6. guy66
    The aerial poles racks back on the side of the radio box.
  7. guy66
    The rear stair is back in place, stil need to fit the bolts on top of the stair .
  8. guy66
    Good to here that you have a solution for your problem, if you need more information always welcome to contact me. I have some wireless stuff that I want to install in my Morris C4 wireless lorry . I am also looking what the Areal base looks like for a HP set 19 , the pictures in the Wireless for warriors book are not so great . Guy
  9. guy66
    Some pictures of a mounting base antenna No3 ZA 1827
  10. guy66
    Stair is a original but had some work to get it back in to shape. Was bend and some rot but happy that this original part will go back on to the radio box.
  11. guy66
    Fruitful day in the workplace. Rear panel in paint and fitted on to the rear of the box. Repairs on the fittings of the rear stair , the metal where the stair is fitted was well rotten and replaced these with some new metal.
  12. guy66
    Morgo makes a Oil pump for Triumph 3 Hw !https://www.morgo.co.uk/product/morgo-triumph-tiger-single-plunger-oil-pump/ But for the moment out of stock .
  13. guy66
    Plate work fitted on to the rear section , in to primer and next a coute of green paint. If the rear section is back in place this will be a big step, this is the last major part of the radio box..
  14. guy66
    Getting there with the rear panel work, still some small bits of plate on the sides where the auxiliary generator hatch sits. The rain gutter on top of the rear door opening and the is also a gutter over the rear hatch.
  15. guy66
    Top front and rear panels back from the custom car builder, he made all the top louvres in the panel's. Started with the top front panel and this one is now fitted on the front of the box Took the rear panel back of the radio box ( only 6 bolts) and had a go one the plate work for the rear. The temptation was to big , started to fit some aerial fittings on the front.
  16. guy66
    And now we have a copy of the rear step on the radio box.
  17. guy66
    Before I put the floor in the radio box I made the rear step. The step is fitted at the rear on the floor and with the floor in position it will be very difficult to fit the step after the floor is in position.
  18. guy66
    Fitted the metal plates on one side of the roof section and next the other side. Also making plans to start with the floor in the radio box .
  19. guy66
    The rolled side plates for the roof are ready, just need to adjust them to the right length. Looking forward to fit these if I find some time next weekend .
  20. guy66
    Thanks for the information Simon , now I have some information how to fit canvas on to a coach build roof . Now I need to check if these products are available here in Belgium . Think it's more a job when there is some hot weather ? Regards Guy
  21. guy66
    Thanks for the information Phil .
  22. guy66
    We have a roof top on the radio box! Now ready to roll the plates for the sides of the roof .
  23. guy66
    Thanks for the pictures bawtrylwt , I now know how this support looks like . I had a ruff idea that it was a simple construction and I am right that it will be easy to reproduce the spare wheel support on the roof. Thanks a million . Guy
  24. guy66
    My doubts about fitting the spare wheel on the roof are fading away. Now that the roof section is almost ready it made a big improvement in stability of this section . I am desperately looking for pictures are information how the spare wheel support looks like on the roof of a Morris radio box. There are some Morris wireless body's on the military vehicle seen but its difficult to get some information from the owners 😕.
  25. guy66
    Angel iron bend and fitted to the roof cross beams, just some welding work to do on the iron and some paint . Next job making the side plate work .
×
×
  • Create New...