Jump to content

guy66

Members
 View Profile  See their activity

  • Posts

    741

  • Joined

  • Last visited

  • Days Won

    5

 Content Type 

Everything posted by guy66

  1. guy66
    And this is the sketch I found in the Wireless for the warrior. Also a picture of the wireless stuff I collected over the year to use in my Morris Commercial C4 wireless .
  2. guy66
    I think that the aerial base looks like the one on the picture Chris ?
  3. guy66
    Hello Chris. Yes it's a house type wireless box that I am bilding and want to make it in to a HP unit . Ass it seems the later house body's had the aerial support in front of the cabin on a metal support. Earlier models had the aerial on the roof. Will post a picture of a base that looks like the thing I am looking for. Regards Guy
  4. guy66
    Fitted the glass in to both windscreens and while finishing this section a made the side deflector for side sections of the windscreens.
  5. guy66
    Hello , anyone have a idea how the jack handles are fitted in to the cabine. There are specific clips for the handles but where are these situated? Thanks.
  6. guy66
    Fitted the glass in to the passenger side windscreen, first had to make a wooden template to have the glass cut the right measurement for the frame. Some time back I found a new old stock rubber seal and used this for the underside of the windscreen to cabine seal. Next job will be the drivers side.
  7. guy66
    Picture from a wireless Morris in use with the Belgian Brigade.
  8. guy66
    Some paintwork on the Morris . The division signs are from the 1st Belgian Brigade and the senses number from a Morris wireless that was in use with this brigade.
  9. guy66
  10. guy66
  11. guy66
    Fruitful weekend on the Morris . Repaired and painted the windscreen frames and made a template to have the safety glass cut And started to fit the interior boards on the front wall and looking how I can fix the charging switch bord and the same for the axillary generator control board . For the moment not really sure if I fit this one next to the operators table are on the left side wall next to the table.
  12. guy66
    If I don't find the right lock for the rear radio box then I make a copy of the original one.
  13. guy66
    Not yet, still looking . For the moment the installation in the radiobox will be a set 19. You never know if I find these parts to go with my HP receiver.
  14. guy66
    Many set 19 stuff is getting difficult these day's, luckily I been collecting for more than 10 years.🫡 But I am still looking to have the high power unit complete, but it is difficult and expensive.
  15. guy66
    Thanks Simon for the information. I have 4 of these rubber feet from Jordan and on the picture are the bits that are bolted on the radio operators table.
  16. guy66
    Starting to mount everything on to the carrier No23.
  17. guy66
    A other piece of the puzzle, collected a bad set 19 on a carrier No 23. It's the right carrier for my wireless truck. I have a almost new set 19 out of Italy but this one is fited on a carrier No25. Had a carrier No 23 on loan to reproduce but now I have the original one.
  18. guy66
    After some minor adjustments we have a nice closing rear door on the radio box . Now ready to fit some sheet metal plate on to the wood. But first of to Normandy for a few days.
  19. guy66
    If you are on holiday , what do you do ?playing with the Morris Made the wooden frame for the rear door and looking to shorten the new door hinges. Ones the radio box door fit's ok I can start to fit sheet metal plate on the wooden frame.
  20. guy66
    Working on the roof ventilation , the ventilator above the axillary generator is in place and I can start to make the roof top cover for this ventilator. Also been looking to fit the 3 ventilation boxes on the roof.
  21. guy66
    The floor is in place , just need to paint 4 small planks in the corners of the box.
  22. guy66
    Metal construction of the radio table is ready, still need to make the little wooden drawer for the left side of the table and also the sliding extension in the middle of the table.
  23. guy66
    Nice in the workshop for the moment! Making the radio table that sits in the front of the radio box, still need to make the frame for the radio operator seat.
  24. guy66
    It's dam cold outside; next week I will look to start with the construction of the radio table . But the welding and construction nice in the workshop !
  25. guy66
    I love all the energy you put in to the this project to get everything so close to original. super job 👍
×
×
  • Create New...