guy66
-
Posts
741 -
Joined
-
Last visited
-
Days Won
5
Content Type
Profiles
Forums
Gallery
Blogs
Events
Articles
Store
Downloads
Everything posted by guy66
-
Good luck , you even have a original engine .
-
In ful swing on the radio box floor, cutting and planing the planks for the floor. Made also the radio operator foot well that's fitted just under the radio table .
-
The aerial poles racks back on the side of the radio box.
-
The rear stair is back in place, stil need to fit the bolts on top of the stair .
-
Good to here that you have a solution for your problem, if you need more information always welcome to contact me. I have some wireless stuff that I want to install in my Morris C4 wireless lorry . I am also looking what the Areal base looks like for a HP set 19 , the pictures in the Wireless for warriors book are not so great . Guy
-
Some pictures of a mounting base antenna No3 ZA 1827
-
Stair is a original but had some work to get it back in to shape. Was bend and some rot but happy that this original part will go back on to the radio box.
-
Fruitful day in the workplace. Rear panel in paint and fitted on to the rear of the box. Repairs on the fittings of the rear stair , the metal where the stair is fitted was well rotten and replaced these with some new metal.
-
Morgo makes a Oil pump for Triumph 3 Hw !https://www.morgo.co.uk/product/morgo-triumph-tiger-single-plunger-oil-pump/ But for the moment out of stock .
-
Plate work fitted on to the rear section , in to primer and next a coute of green paint. If the rear section is back in place this will be a big step, this is the last major part of the radio box..
-
Getting there with the rear panel work, still some small bits of plate on the sides where the auxiliary generator hatch sits. The rain gutter on top of the rear door opening and the is also a gutter over the rear hatch.
-
Top front and rear panels back from the custom car builder, he made all the top louvres in the panel's. Started with the top front panel and this one is now fitted on the front of the box Took the rear panel back of the radio box ( only 6 bolts) and had a go one the plate work for the rear. The temptation was to big , started to fit some aerial fittings on the front.
-
And now we have a copy of the rear step on the radio box.
-
Before I put the floor in the radio box I made the rear step. The step is fitted at the rear on the floor and with the floor in position it will be very difficult to fit the step after the floor is in position.
-
Fitted the metal plates on one side of the roof section and next the other side. Also making plans to start with the floor in the radio box .
-
The rolled side plates for the roof are ready, just need to adjust them to the right length. Looking forward to fit these if I find some time next weekend .
-
Thanks for the information Simon , now I have some information how to fit canvas on to a coach build roof . Now I need to check if these products are available here in Belgium . Think it's more a job when there is some hot weather ? Regards Guy
-
Thanks for the information Phil .
-
We have a roof top on the radio box! Now ready to roll the plates for the sides of the roof .
-
Thanks for the pictures bawtrylwt , I now know how this support looks like . I had a ruff idea that it was a simple construction and I am right that it will be easy to reproduce the spare wheel support on the roof. Thanks a million . Guy
-
My doubts about fitting the spare wheel on the roof are fading away. Now that the roof section is almost ready it made a big improvement in stability of this section . I am desperately looking for pictures are information how the spare wheel support looks like on the roof of a Morris radio box. There are some Morris wireless body's on the military vehicle seen but its difficult to get some information from the owners 😕.
-
Angel iron bend and fitted to the roof cross beams, just some welding work to do on the iron and some paint . Next job making the side plate work .
-
Need to cut 4 metal plates and roll them a bit , these are fitted on the rounded sides of the roof and centre is covered with wooden planks
-
Roof frame is ready! Made 8 angled metal supports and the construction starts to get more rigid now that everything is screwed together. Next step will be the angle irons that are screwed on to the cross beams and waiting for some information how the spare wheel is fixed on the roof.
-
A little update ! Made little progress on the roof, a day work trial fitting and measuring and adjusting.
