Steve A Posted March 14, 2017 Share Posted March 14, 2017 Hello All Does any one know if there is a maintenance manual for this type of generator, my FFR Landrover is sounding like it is in pain as the generator could do with some grease on its bearings, but can't see anything that allows that to happen Any help, greatfully received Steve Quote Link to comment Share on other sites More sharing options...
fv1609 Posted March 14, 2017 Share Posted March 14, 2017 Steve there is some coverage here: http://hmvf.co.uk/forumvb/showthread.php?52808-All-Charged-Up-4-Latest-Version Quote Link to comment Share on other sites More sharing options...
ruxy Posted March 14, 2017 Share Posted March 14, 2017 Hello All Does any one know if there is a maintenance manual for this type of generator, my FFR Landrover is sounding like it is in pain as the generator could do with some grease on its bearings, but can't see anything that allows that to happen Any help, greatfully received Steve The genny end casting bearing housing - end next to Vee belts (this is the BIG special and expensive bearing - Lucas borrowed it off Leece-Neville / Prestolite) ) , look at the top you will probably see a dome head screw and alloy washer (you may even see a tiny cup oiler) . Drip a little oil/grease MOS2 slurry in - see if it quietens. Normally it is a re-pack with grease at inspection check. The smaller rear bearing can be got at relatively easy IIRC , a while since I stripped a 90A Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.