Rick W Posted May 16, 2008 Share Posted May 16, 2008 Sent the crank off to my local engineer to be worked on this morning. He is asking what the journal size should be and what the bottom limit is. Anyone any idea? Quote Link to comment Share on other sites More sharing options...
Snapper Posted May 16, 2008 Share Posted May 16, 2008 Who are you calling a crank? MB Quote Link to comment Share on other sites More sharing options...
Rick W Posted May 16, 2008 Author Share Posted May 16, 2008 :-DWhats the limit of your bottom Mark?? Quote Link to comment Share on other sites More sharing options...
Snapper Posted May 16, 2008 Share Posted May 16, 2008 Ask my wife and she'll say it has no limits as she passes round the clothes pegs.....:sweat: and now ....back to the topic..... :-D MB Quote Link to comment Share on other sites More sharing options...
ashley Posted May 16, 2008 Share Posted May 16, 2008 taking these facts from the book....... IF the diameter of each crankshaft journal is less than 1.9365 inches on the crankpin journals or 2.3325 inches on the main bearing journals or if any of the journals are out- of -round more than 0.0005 inch the crankshaft must be re-worked to 0.010, 0.020, 0.030 inch undersized which ever the case may be. Crankshafts that will not clean up at 0.030 inch undersize must be replaced taken from `The complete military JEEP MANUAL`Brooklands Books aSHLEY Quote Link to comment Share on other sites More sharing options...
Rick W Posted May 16, 2008 Author Share Posted May 16, 2008 Thanks Ash. Quote Link to comment Share on other sites More sharing options...
.thumb.JPG.fbe532a8a386c5010fe8daa1ff85aa23.JPG)
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.