I am looking for help to identify a thread type on the Leyland Retriever main output shaft from the transfer case the thread appears to be 16 TPI @ 55' RH thread OD 31.75mm ( 1 1/4" ) the nut would be a 6 slotted hex @ 52.07 mm ( 2 3/64" ) a/c flats, 15mm total ht including 8mm deep slots. The parts list is not helpful as it lists the nut but just says "special thread" I'm guessing this would be to fit a 1 1/4" W or 1 3/8" BSF spanner
Question
Pete Ashby
I am looking for help to identify a thread type on the Leyland Retriever main output shaft from the transfer case the thread appears to be 16 TPI @ 55' RH thread OD 31.75mm ( 1 1/4" ) the nut would be a 6 slotted hex @ 52.07 mm ( 2 3/64" ) a/c flats, 15mm total ht including 8mm deep slots. The parts list is not helpful as it lists the nut but just says "special thread" I'm guessing this would be to fit a 1 1/4" W or 1 3/8" BSF spanner
Any ideas ?
Thanks
Pete
Edited by Pete AshbyLink to comment
Share on other sites
9 answers to this question
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.