My 12 volt WC51 is misfiring erratically under load. Fitted with Frank Jolleys electronic ignition, distributor cap clean no wear, rotor arm slight black on end. . Idles fine. Pulled plug tops off at idle, no changes. Fuel my be a bit rough but has been drained out and fresh with fuel system cleaner run through it. Begining to suspect coil , fitted before I got her fifteen years ago now. So suggestions please.
Question
Tony B
My 12 volt WC51 is misfiring erratically under load. Fitted with Frank Jolleys electronic ignition, distributor cap clean no wear, rotor arm slight black on end. . Idles fine. Pulled plug tops off at idle, no changes. Fuel my be a bit rough but has been drained out and fresh with fuel system cleaner run through it. Begining to suspect coil , fitted before I got her fifteen years ago now. So suggestions please.
Link to comment
Share on other sites
12 answers to this question
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.