Charlie Posted March 17, 2014 Share Posted March 17, 2014 Is there an easy way to take off the rev limiter 'white disc' disc and then slip the rev limiter belt off so you can get the generator belt on? Or is it a pain in the arse job? C. Quote Link to comment Share on other sites More sharing options...
sirhc Posted March 17, 2014 Share Posted March 17, 2014 Charlie, Not as easy a job as it should be as those discs can be a problem! You'll just have to undo them as best you can. Chris Quote Link to comment Share on other sites More sharing options...
timbo Posted March 18, 2014 Share Posted March 18, 2014 Its a pain in the a**e!! The bolts always seem to round off no matter how careful you are, and then you have no choice but to drill them out. Last time I did it I removed the whole fan to replace the bearings which at least made it a little easier - good luck! Timbo Quote Link to comment Share on other sites More sharing options...
timbo Posted March 18, 2014 Share Posted March 18, 2014 In fact, could you not just drop the fan out - I suspect this will be the easier option....after all it is only 5 bolts...? Timbo Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.