Rick W Posted April 4, 2007 Share Posted April 4, 2007 Bit of a long shot this, anyone know of an online place where I can send them dimensions of some metal bits I need to make up that can then be fabricated? Quote Link to comment Share on other sites More sharing options...
Scammell4199 Posted April 12, 2007 Share Posted April 12, 2007 Hi Rick, Depending on what you want done I might be able to do it for you - for a price. I am an engineer and have a reasonably well equipped workshop plus a very well equipped one at work. Let me know on here if you're interested and i'll let you have my address to send drawings to. Best regards Richard Quote Link to comment Share on other sites More sharing options...
Rick W Posted April 12, 2007 Author Share Posted April 12, 2007 Hello, Thanks for the reply, yes I am interested, i need a couple of c- sections to repair/reinforce part of the chassis. I dont suppose you can etch a lube diagram onto a brass plate can you?? Quote Link to comment Share on other sites More sharing options...
Scammell4199 Posted April 15, 2007 Share Posted April 15, 2007 Rick, Definatly can't etch brass plate. Send a drawing of the 'C' section you want to either of the below and i'll take a look. Email: scammell4199@hotmail.com 10 Easthams Road Crewkerne Somerset TA18 7AQ Quote Link to comment Share on other sites More sharing options...
Rick W Posted April 17, 2007 Author Share Posted April 17, 2007 Wildo, thanks for that. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.