I've spent the last couple of days working on Katy. I decided to check the four wheel drive system out. I jacked the vehcile up on one side so front and back wheels were off the ground. So now the head banging bit. The 4wd lever appears to be operating backwards! When the selector lever is forward forward in what I've always known as , and the plates on 51 confirm is, the DISENGAGED position the front wheel and back wheel go round. When back only the back wheel goes round. There is a Norwegian plate on the dash. In the forward position for the lever the wording is FORHJULENE-UTKBLET. In the rear position it is marked FORHJULENE-INNKOBLET. Can anyone translate for me please? Also what is the fan belt size for a 6 volt WC54? The markings on the existing belt are 3030-264-3069 but it is at full stretch and well past retirment.
Question
Tony B
I've spent the last couple of days working on Katy. I decided to check the four wheel drive system out. I jacked the vehcile up on one side so front and back wheels were off the ground. So now the head banging bit. The 4wd lever appears to be operating backwards! When the selector lever is forward forward in what I've always known as , and the plates on 51 confirm is, the DISENGAGED position the front wheel and back wheel go round. When back only the back wheel goes round. There is a Norwegian plate on the dash. In the forward position for the lever the wording is FORHJULENE-UTKBLET. In the rear position it is marked FORHJULENE-INNKOBLET. Can anyone translate for me please? Also what is the fan belt size for a 6 volt WC54? The markings on the existing belt are 3030-264-3069 but it is at full stretch and well past retirment.
Link to comment
Share on other sites
3 answers to this question
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.