Glynn
-
Posts
54 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Blogs
Events
Articles
Store
Downloads
Everything posted by Glynn
-
I once had a three foot six maniac woman not that good really:nono: Hey willys your spot on there "gorgeous" once drove a kit one.
-
Im such a good boy(and butt kisser) i will donate my 3 things to oily if i can borrow his land forsome of his toys for playing.:cool2:
-
Hi malc sounds like an interesting project .Have you got drawings or a mate with one you can measure up? And what scale will it be?
-
question Using a brake flaring tool
Glynn replied to ferrettkitt's question in I may be stupid, but......
Biggest problem is alignment on op1 make sure end is square and op1 punch bang on centre, on some cheap tools the centre alignment pin is too small. The moprod tool is brill but only made in 3/16" .I use an ancient sykes tool perfect every time. -
Cheers bodge
-
hi sorry to change subject but where does mvt meet around here? not much seems to happen in north cumbria unless you can tell me otherwise:-D
-
I agree sort of a board for non british non american vehicles possibly called other vehicles:shocked:
-
Try a bearing supplier as they do locknuts big diams fine threads.
-
torch on felt is really good melt the underside with blowtorch glues it down and joins sections
-
yeah proper size especially with rusty nuts .yes halfords stuff very good comparable with the best i would say.
-
hi phil this is a great site loads of help and info
-
I would be up for it ,and i was in sports six club many years ago and went out to help a guy with a herald ,towed him to a garage but his anti roll bar wasnt as secure as it should have been oops. But yeah wouldnt want my info for all to see just members.
-
M Pugh dont do this anymore john hamer has taken over 01462834778 am trying to get some done let you know result.
-
Do you think they would do a copper with a trunchion to scare off the yobs or maybe that tank would do it . Cool:cool2:
-
welcome we need more people from north of watford
-
Hi told you might be able to help. I have a copy of in national service by pat ware and pages 13 to 29 inclusive are missing and 29 to 44 are duplicated(printing error) bought from a trader at a show (unable to contact) tried contacting publisher again but contact info must have changed.
Do you have a pdf or scan of these pages or know how to contact the publisher?
Thanks Glynn:)
-
:cry: Hi all. I have a copy of in national service by pat ware and pages 13 to 29 inclusive are missing and 29 to 44 are duplicated(printing error) bought from a trader at a show (unable to contact) tried contacting publisher again no good . Does any kind person have a pdf of these pages or know how to contact Pat Ware ? Thanks all Glynn:)
-
Here is a question for you. What sensible mods can be done to the typical mv to improve economy and what priority should they be in? for example :- fitting electric fan for radiator. Different airfilter etc :cool2:
-
question H2 repair hydraulic bottle jack
Glynn replied to mcspool's question in I may be stupid, but......
is it leaking fluid around the ram? does the valve feel as if its closing properly ? if its a well known make you may be able to get parts but if not it will be easier to buy a new one. I repaired one once and it cost me £20 for the ram seal. In mine i use aws32 hydraulic oil but always go with what manufacturer recommends and dont take risks.:stop: -
America has some great shops for tools virtually any decent size supermarket has a fantastic tool section. Tig welders are good if you can use them im struggling a bit with mine but will persevere(i find alloy easy but rubbish with steel) Like the torkgrip link.
-
Spotted in Carlisle a diamond t will get info asap
-
might be worth checking you dont have a dragging brake.:shocked:
-
Hi welcome to the group. Thas is a great site loads of good info ,i keep finding new stuff all the time. Have fun:)
-
ok cheers guys
-
hi any plans to get a vehicle and what?