Kloud Nine Posted February 11, 2016 Share Posted February 11, 2016 Hi Folks, Following on from my post RE K9 manifold, could I get an identification of my (new) manifold, which may be a later K9 one, not sure now, and give me suggestions on a suitable carb to fit it? My old carb won't fit the new manifold. The inlet ports on the new manifold are smaller than on my head but I'm thinking I could maybe get them bored out to fit the sleeves... (3.6mm to 4.1mm to a depth of 5mm) Markings on the manifold are: S & W 11k 298 MOWOG Bolt centers for carb 65mm 3/8 BSF Bore 3.1mm Any ideas? Cheers, C. Quote Link to comment Share on other sites More sharing options...
GeePig Posted February 11, 2016 Share Posted February 11, 2016 K9, as in Austin K9? If that is a part for an Austin I would imagine it was a late one, as that is the Morris/Wolsely foundry mark. trevor Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.